| Items | Kugona |
| bhodhi classification | Aluminium Base, Copper Base, iron Base, ceramics base copper-clad, Yakasanganiswa Bade Board |
| zvinhu | Zvemumba Aluminium, Domestic copper, lmported aluminium, lmported mhangura |
| pamusoro kurapwa | HASL/ENIG/OSP/silver |
| layer account | bhodhi rimwechete rakadhindwa bhodhi / mativi maviri akadhindwa bhodhi |
| maxi.board Size | 1200mm*480mm |
| min.board Size | 5mm*5mm |
| tsvaga hupamhi/apsce | 0.1mm/0.1mm |
| warp uye twist | <=0.5%(ukobvu:1.6mm, Bhodhi Saizi: 300mm * 300mm) |
| bhodhi ukobvu | 0.5mm-5.0mm |
| mhangura benzi ukobvu | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| V-CUT dhigirii kushivirira | CNC nzira: ± 0.1mm; punch: ± 0.1mm |
| V-CUT kunyoresa | ±0.1mm |
| Gomba rusvingo rwemhangura ukobvu | 20um-35um |
| Min kunyoreswa kwegomba chinzvimbo (enzanisa neCAD data) | ±3mil(±0.076mm) |
| Min.kubaya gomba | 1.0mm pazasi, 1.0mm (Bhodhi ukobvu pasi pe1.0mm, 1.0mm) |
| Min.punching square slot | 1.0mm pazasi, 1.0mm * 1.0mm (Board ukobvu pazasi 1.0mm, 1.0mm * 1.0mm) |
| Kunyoreswa kwedunhu rakadhindwa | ± 0.076mm |
| Min.drill gomba dhayamita | 0.6mm |
ukobvu hwekurapa kwepamusoro | kuisa goridhe: Ni 4um-6um, Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um silvering:Ag3um-8um HASL:40um-100um |
| V-CUTdegree kushivirira | ±5(Degree) |
| V-CUT bhodhi ukobvu | 0.6mm-4.0mm |
| Min.Lefend width | 0.15mm |
| Min.Solder mask kuvhura | 0.35mm |